Aqor 3mm Backplate Stainless Steel with DIR Harness

incl. 25% VAT plus Shipping Costs
In Stock - Delivery 5-10 days

The AQOR Stainless Steel Backplate is made of high-quality 3 mm V4A stainless steel with a refined surface.
The hole spacing is selected so that accessories from all well-known manufacturers can be used on the AQOR backplate, if necessary.

All outer and inner edges and slots are CNC milled with large, round radii so that sharp edges do not wear down harnesses, wings and other accessories. 
The slightly sloped edges in the lumbar area ensure a comfortable fit and prevent any pressure points, even with heavy diving equipment.

The lower slotted hole for mounting the cylinders allows a certain degree of flexibility if, for example, the clamp spacing on borrowed cylinders is not exactly right. The upper three holes for mounting the cylinder enable quick fine-tuning of the trim by changing the mounting position of the backplate to one of the other holes.

Additional slots allow the direct attachment of cylinder tensioning straps for a single cylinder. This means that the backplate can be used in every area of ​​diving.

The AQOR DIR harness is made of stiff webbing material. We deliberately chose this material because it offers significant advantages over softer materials.
Firstly, the scuba suit sits much more securely on your back, positively impacting your underwater trim position. Secondly, getting into the scuba suit is much easier, as the strap is less likely to twist or catch on other equipment.
The crotch strap is made of soft webbing material.

• Material: V4A
• Thickness: 3 mm
• Weight: 2.1 kg (backplate)
• 1 x strap: 4.5 m, including central eyelet
• 1 x crotch strap
• 5 x D-rings (2 x offset)
• 8 x belt gliders
• 5 x EDPM Rubber Loop
• 1 x O-ring for attaching the corrugated hose
• 1 x AQOR belt buckle